AVI Implementation: 89 Manual Inspectors to 2 Machines
- €4.2M annual savings
- ROI under 2 years
- Recipe time 42 to 7 days
Sterile fill-finish manufacturer with large-scale GMP production
A sterile fill-finish facility ran 89 manual visual inspectors on a single production line. The question was not whether to automate, but how to validate the transition in a GMP environment without disrupting the inspection track record.
The challenge
The situation
The facility ran 89 trained manual visual inspectors on its fill-finish line, with full FTE cost, qualification overhead and scheduling complexity. The business case for automated visual inspection was clear, but the regulatory path required careful preparation: replacing manual inspection under GxP means demonstrating that the AVI system achieves at least equivalent detection performance through a formal probability-of-detection study, run against the manual reference standard before the line changes, with the system fully validated (EU GMP Annex 11; 21 CFR 211.68(b); 21 CFR 11.10(a)) before it can operate as the sole inspection method; GAMP 5 served as the guidance framework for the validation. Without this sequence, the validation package does not hold up under Annex 1 scrutiny.
Our approach
How Entourage approached it
Defect library development
catalog of defect types, sizes and frequencies across the fill-finish output, structured as the reference standard for the probability-of-detection (PoD) study
Methodology validation (PoD study)
detection study comparing AVI performance against manual inspection, structured to meet EU GMP Annex 1 requirements for AVI as a replacement for manual inspection
GAMP 5 computer validation
full validation lifecycle from URS through IQ/OQ/PQ, data integrity and audit trail under EU GMP Annex 11 and 21 CFR Part 11
Recipe development
definition and optimization of machine recipes across all product types on the line, reducing recipe setup time from 42 to 7 days
The outcome
What changed
The facility operates two AVI machines in place of 89 manual inspectors, with a validated inspection method that holds up under EU and FDA inspection. Annual savings of €4.2M, ROI recovered in under two years, and recipe time reduced by 83 percent.
€4.2M annual savings
Full FTE cost reduction from 89 manual inspectors to 2 machine operators, including training, qualification and scheduling overhead.
ROI under 2 years
Capital investment recovered within less than two years, based on annual operating cost delta between manual and automated inspection.
Recipe time 42 to 7 days
Recipe development and qualification time reduced by 83 percent, accelerating product changeover and new product introduction.
Zero validation deviations at go-live
AVI system released with no open deviations and a complete GAMP 5 validation package, inspection-ready from day one.
Your next step
What this topic involves and how we work is set out on the topic page.
Automated Visual Inspection →To start, the On-site Quick Check brings us to your site for one to three days to check the current state.
About the On-site Quick Check →Regulations & standards considered
- EU GMP Annex 1 (Manufacture of Sterile Medicinal Products, Revision 2022, Sections 8.30-8.33)
- ISPE GAMP 5 (2nd Edition, 2022): A Risk-Based Approach to Compliant GxP Computerised Systems
- EU GMP Annex 11 (Computerised Systems, EudraLex Vol. 4)
- FDA 21 CFR Part 211.68 (Automatic, Mechanical, and Electronic Equipment)
Related expertise
Automated Visual Inspection →
AVI system selection, methodology validation and GAMP 5 computer validation
Annex 1 (Sterile Manufacturing) →
Requirements of the revised Annex 1 for AVI qualification and HVAC
Computer System Validation (CSV) →
GAMP 5 validation for GxP computerised systems including AVI software
Similar projects
More on Pharma →Image notice: The images on this page were generated using artificial intelligence. They do not depict real people, places, or events.
Sources
- EU GMP Annex 1: Manufacture of Sterile Medicinal Products (Revision 2022)
- ISPE GAMP 5, 2nd Edition (2022)
- EU GMP Annex 11: Computerised Systems (EudraLex Vol. 4)
- Entourage, avi-savings.theentourage.de (reference project, anonymized)
Your project
A comparable project?
Briefly outline your situation. We'll respond with an initial assessment, usually within one business day.
Prefer direct? +49 89 4161170-0
contact@theentourage.de
- Reply usually within one working day
- 3 locations: DE · CH · IT · projects in the US too
- 100% life sciences



